CINEMA SERIES
One Main Street, Whitinsville, MA 01588 • (508) 234-6158 • FAX (508) 234-8251 • Email [email protected] • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. • CR58 PUB#888133 Rev(A)/6/1/99 • Printed In USA
Technical Specifications CR58
DESCRIPTIVE DATA
LF Subsystem & Loading
1x 15-in, vented
HF Subsystem & Loading
1x 1-in exit compression driver
on 90 x 70 CD horn
Number of Audio Bands
2-way
Powering Mode
Passive
Cabinet Type (shape)
Rectangular w/slanted baffle (20
°
)
Enclosure Materials
3/4-in MDF
Finish
Textured Black
Connectors
2-terminal barrier strip
Suspension Hardware
(11) 3/8-16 threaded inserts
Grill
Black cloth
NOMINAL DATA
Frequency Response (1 Watt @ 1m)
±
3 dB
50 Hz – 18 kHz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Full Range
98
Impedance (Ohms)
Full Range
8
Power Handling, AES Standard (Watts)
Full Range
500
Calculated Maximum Output (dB SPL @ 1m)
Full Range Peak
131.0
Full Range Long Term
125.0
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal
90
Vertical
70
Dimensions
Inches
Centimeters
Height
17.25
43.8
Width
29.75
75.6
Depth (Top)
15.25
38.7
Depth (Bottom)
10.5
26.7
Weights
Pounds
Kilograms
Net Weight
56
25.5
Shipping Weight
64
29.1
COMPONENTS & CONSTRUCTION
The CR58 two-way full range cinema surround loudspeaker system
employs one 15-in cone transducer mounted in an optimally vented
enclosure and one 1-in exit, titanium diaphragm compression driver
mounted to a 90
°
x 70
°
dispersion pattern constant directivity horn.
The LF and HF sections are integrated with a complex, multicompo-
nent, passive crossover/filter network.
The enclosure is constructed of 3/4-in thickness Medium Density
Fiberboard (MDF). Extensive internal bracing is employed to mini-
mize panel resonances resulting from the large acoustical energies
generated within the enclosure while maximizing acoustical energy
transfer into the audience area. A total of eleven 3/8"-16 threaded
mounting points facilitate a wide variety of mounting option.
The input connector, located on the top of the enclosure, is a two-
terminal barrier strip designed to accommodate bare wire, tinned
leads or spade lugs. For safety, the grill is attached with multiple
threaded fasteners.
