EAW CF-2LZ Installation Manual Download Page 2

2

 – CF-2LZ/CF-2TX

1. SAFETY INSTRUCTIONS

1.  Read these instructions. 
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with a dry cloth.
7.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 

(including amplifiers) that produce heat.

9.  Only use attachments/accessories specified by the manufacturer.
10.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus 

has been damaged in any way, such as liquid has been spilled or objects have fallen into the 

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has 

been dropped.

11.  The entire sound system must be designed in compliance with the current standards and laws 

regarding electrical systems.

Part No. 0023393  Rev. A  05/2008 
© 2008 LOUD Technologies Inc.  All Rights Reserved.  
Printed in China.

The exclamation point within an 

equilateral triangle is intended to 

alert the user of the presence of 

important operating and maintenance 

(servicing) instructions in the literature 

accompanying the apparatus.

Dimensions

Clip Fit Bracket with speaker attached

WARNING!

 This equipment has been designed to be installed by qualified professionals only! 

There are many factors to be considered when installing professional sound reinforcement 

systems, including mechanical and electrical considerations, as well as acoustic coverage and 

performance. EAW Commercial strongly recommends that this equipment be installed only by a 

professional sound installer or contractor.

Summary of Contents for CF-2LZ













Reviews: