Part No. SW0178 Rev. C 05/07
CAZ
2500
STEREO POWER AMPLIFIER
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 |
Page 4 of 4
Csi PRoDUCT sPeCiFiCATions FoR DesiGneRs, sPeCiFieRs, AnD ConsUlTAnTs
(Also known as “A&E Specifications”)
The following are “Part 2 Products” CSI-type specifications. It is assumed that “Part 1 General – Administrative and Procedures”
and “Part 3 Execution – Installation and Maintenance” are part of an overall audio system or project specification.
PART 2 PRoDUCTs
2.01
Approved manufacturer/Product
A. EAW Commercial, One Main Street, Whitinsville, MA 01588
B. Model number:
CAZ2500
2.02
Design
A. Configuration:
2-channel power amplifier
1. Inputs:
a. Two balanced mono line inputs (two XLR/1/4" TRS combo line-level input jacks)
b. One screw terminal input strip (Channel A balanced, Channel B balanced)
2. Outputs:
a. One screw terminal output strip (Channel A, Channel B, Bridged Mono)
B. Powering Mode:
a. Internal AC power supply, 120 VAC, 60 Hz or 230 VAC, 50/60 Hz.
2.03
electrical Properties
A. Frequency Response (+0, –1 dB):
25 Hz to 25 kHz
B. Total Harmonic Distortion (20 Hz to 20 kHz @ rated output into 8 ohms):
< 0.03%
C. Signal-to-Noise Ratio:
>100 dB below rated power into 4 ohms
D. Channel Separation (@ 1 kHz):
> 90 dB
E. Input Gain Control Range:
Off to +30 dB
F.
Maximum Input Level:
9.75 V rms (+22 dBu)
G. Rated Output:
1. Continuous sine wave average output power per channel, both channels driven:
a. 575 watts rms into 8 ohms
b. 750 watts rms into 4 ohms
c. 1400 watts rms into 2 ohms
2. Continuous sine wave average output power, bridged mono operation:
a. 1500 watts rms into 8 ohms
b. 2500 watts rms into 4 ohms
2.04
Physical Properties
A. Dimensions
1. Height:
3.5 in/89 mm
2. Width:
19.0 in/483 mm
3. Depth:
15.7 in/400 mm
B. Weight
1. Net Weight:
56.2 lb/25.5 kg
