1
– CAM160 / CAM80
8. SPECIFICATIONS
Audio Inputs
Input Type
Balanced Differential, Unbalanced
Input Impedance
30 k
Ω
(Bal, Line-In)
2.7 k
Ω
(Bal, Mic-In)
15 k
Ω
(UnBal, RCA-In)
Output Impedance:
1 k
Ω
(UnBal, RCA-Out) (At Direct Outputs)
Input Gain Trim Range:
-3 dB to 40 dB (Mic Input)
-23 dB to 20 dB (Line Input)
Maximum Input Level:
+19 dBV
Nominal Input Level:
0 dBV
Dynamic Range
105 dB
Phantom Power
24 V
Frequency Response:
20 Hz - 20 kHz + 1 dB
Total Harmonic Distortion
(Inputs 1-6, and Aux):
> 0.1% 20 Hz - 20 kHz @ 0 dBV
EQ
Butterworth, ±12 dB fixed at 100 Hz
±12 dB fixed at 10 kHz
Audio Outputs
Output Type:
Unbalanced / Impedance Balanced
Output Impedance:
150
Ω
/ 300
Ω
Nominal Output Level (Both Preamp & Tape Outputs):
0 dBV
Dynamic Range:
95 dBV
Frequency Response (Tape Output):
20 Hz - 20 kHz +/- 1 dB
Total Harmonic Distortion
(Preamp Out):
> 0.04% 20 Hz - 20 kHz @ 0 dBV
Power Amplifier
CAM80 Output Power at 1% THD @ 1 kHz:
80 W @ 100 V
80 W @ 70 V
80 W @ 25 V
80 W @ 4
Ω
CAM160 Output Power at 1% THD @ 1 kHz:
160 W @ 100V
160 W @ 70V
160 W @ 25 V
160 W @ 4
Ω
Total Harmonic Distortion:
< 0.15%
(100 V, 70 V, 25 V & 4
Ω
modes)
Power Bandwidth (at -1 dBr, all modes):
40 Hz - 15 kHz (+0 dB –3 dB)
Signal to Noise ratio:
95 dBV
Protection:
Heatsink Overtemp, DC offset, Short Circuit
AC Line Input Power
~100 VAC to 240VAC 50/60Hz 110 W (CAM80)
220 W (CAM160)
AC Input Low Voltage Detector threshold
70% of Nominal Line
Physical Specifications
Height (Excluding Feet):
3.46 inches (88 mm)
Width (Overall):
19.00 inches (483 mm)
Depth (Rear side of Rack ear to Rear panel, excluding connectors):
15.00 inches (381 mm)
CAM80 Weight:
Net
18.8 lbs. (8.4 kg)
Shipping
24 lbs. (10.7 kg)
CAM160 Weight:
Net
20.8 lbs. (9.3 kg)
Shipping
26 lbs. (11.6 kg)
Operating Temperature Range
-10°C to 45°C, 14°F to 113°F
DISCLAIMER
EAW Commercial continually engages in research related
to product improvement, new materials, and production
methods. Design refinements are introduced into existing
products without notice as a routine expression of that
philosophy. For this reason, any current EAW Commercial
product may differ in some respect from its published
description, but will always equal or exceed the original design
specifications unless otherwise stated.
“EAW Commercial” is a trademark of LOUD Technologies
Inc. All other brand names mentioned are trademarks or
registered trademarks of their respective holders, and are
hereby acknowledged.
