SPECIFICATIONS AS422e
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
AS422e/2 pp
October 2001
Printed in USA
INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE)
INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (NUT PLATE).
INDICATES CENTER OF BALANCE.
FRONT
22.50
24.62
GRILLE PARTIALLY SHOWN
BACK
4.00
(1.50)
C
5.00
L
L
C
19.50
6.94
ACCESS PANEL
INPUT
509139 (0)
TOP/BOTTOM
16.31
23.00
4.24
L
C
A
A
20°
11.75
19.39
(16.51)
13.64
SIDES
DIMENSION APPLY
TO BOTH SIDES
L
C
4.63
16.56
18.60
The low frequency loudspeaker system shall incorporate 2x
12-in LF transducers that shall be mounted in slanted baffles
and separated vertically.
System frequency response shall vary no more than ±3 dB
from 67 to 500 Hz measured on axis. The system shall produce
a Sound Pressure Level (SPL) of 102 dB SPL on axis at 1 meter
with a power input of 1 Watt, and shall be capable of pro-
ducing a peak output of 137 dB SPL on axis at 1 meter. The
system shall handle 800 Watts of amplifier power (continu-
ous) and shall have a nominal impedance of 4 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of multi-ply, void-free cross-grain-lami-
nated, exterior grade, Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear-resist-
ant textured black paint. Input connectors shall be 2-contact
terminal barrier strips. Eighteen (18) 3/8"-16 threaded
mounting/suspension points (4 each top, bottom and sides, 2
on back) shall be provided. The front of the loudspeaker shall
be covered with a powder coated perforated steel grille.
The low frequency loudspeaker shall be the EAW model
AS422e.
20°
509139 (0)
5/22/01
Manufacturing tolerances are +/- 0.13 and +/- 1°
