21
09/15 MN03407003Z-DE/EN
4
Geräte betreiben
Einstellungen
Vor der Erstinbetriebnahme des Motorschutzrelais muss der
Motornennstrom mit Hilfe einer Stromeinstellscheibe am
Relais eingestellt werden (
Rücksetzung
Das Motorschutzrelais bietet mit Hilfe des Wahlknopfes
„Reset“ die Möglichkeit, zwischen einem automatischem
Wiederanlauf „A“ und einer Handrücksetzung „H“ zu
wählen.
Abbildung 10: Schaltmöglichkeiten mit Wahlknopf „Reset“
Die Stellung „H“ verhindert einen automatischen Wieder-
anlauf und ist werksseitig bei dem Motorschutzrelais vorge-
wählt. In der Stellung „H“ muss das Relais nach einer
Auslösung händisch durch Drücken dieses Wahlknopfes
zurückgesetzt werden.
i
Warnung!
Bei einem kühlen Aufstellungsort des Motorschutzrelais
(z. B. -5 °C) und einem warmen Aufstellungsort des
Motors (z. B. 40 °C) kann es im Überlastfall zu einer
verzögerten Auslösung kommen, wenn die Geräte im
unteren Stromeinstellbereich betrieben werden.
H
A