6 Operation
6.2 Starting the device
44
MICRO PANEL XVS400 10.4"/12.1"/15"
10/2011 MN04802012Z-EN
www.eaton.com
6.2
Starting the device
1
Insert the CF card with the operating system:
1.1
Remove the CF slot cover (A).
1.2
Insert the CF cards into the CF slots:
CF card with operating system in CF slot 0 (C)
CF card with data in CF slot 1 (B)
1.3
Fit the CF slot cover (A).
CAUTION
Data loss
During a write operation, the CF card may lose data or may be destroyed if it is re-
moved or if there is a power failure.
Always secure CF cards with the CF slot cover.
Avoid write operations to CF cards. Reasons:
-
The number of write cycles possible on CF cards is limited.
-
A power failure during write operations will most likely lead to loss of data.
Before removing the CF card in CF slot 1, ensure that no software write opera-
tions to the CF card are in progress («CF ACT» LED must not be lit).
Only remove the CF card from CF slot 0 when the device is in a de-energized
state.
Before switching off, ensure that no software write operations to the CF card are
in progress («CF ACT» LED must not be lit).
Fig. 28 Service side of the device (CF slot cover fitted)
Do not apply any force (CF cards are protected against reverse insertion).
Fig. 29 Service side of the device (CF slot cover removed)