1. Description
1.3 Device models - versions and part nos.
1.3 Device models - versions and part nos.
1.3.1 Basic features
All XV are equipped with:
- the Windows Embedded Compact 7 pro operating system
- an industrial capacitive multitouch display, PCT
- an SD/SDHC memory card slot.
Every HMI panel comes with the following integrated interfaces as standard:
l
One Ethernet port (10/100 Mbit/s) for use as a communication or field bus interface
l
One USB 2.0 host port for memory and other accessories, full power (500 mA)
l
One USB device 2.0,
l
One standard RS-232 (COM1) port for communicating with PLCs or devices
l
One standard RS-485 (COM2) port for communicating with PLCs or devices
l
One standard CAN interface for the CANopen protocol, J1939 protocol, etc.
1.3.2 Device variants
One of the main differences between the various device models is the specific mount-
ing method that must be used when installing the devices in an enclosure.
l
Front mounting, in which the device is inserted into the enclosure from the front
l
Rear (panel) mounting, which provides a flush alignment with the enclosure's sur-
face
1.3.3 Optional features
The following individual options are available in order to ensure that the unit will best
meet the needs of the application at hand:
l
Two widescreen display sizes: 7.0" or 10.1" widescreen
l
Device bundles with visualization software and/or control software licenses.
Additional integrated interfaces
l
Second Ethernet port (10/100 Mbit/s) for use as a communication interface
l
PROFIBUS-DP, universal field bus interface for all typical protocols
l
SWD for an efficient use of SmartWire-DT
®
technology and its comprehensive fea-
tures
XV300
12/15 MN048017 EN www.eaton.eu
17
