5 Installation
5.3 Interfaces
HMI/PLC XV-102
08/2016 MN04802004Z-EN
www.eaton.com
37
5.3.8
SmartWire-DT Master
The SmartWire-DT Master interface is
not
galvanically isolated.
5.3.8.1
Additional documentation for devices with SmartWire-DT Master interface
In addition to this document, the following documents are required to build a SmartWire-DT network, to
install the network at the SmartWire-DT Master interface and to operate the network:
MN05006002Z SmartWire-DT The System Manual
(System description, engineering, installation, commissioning, and diagnostics for a SmartWire-DT
network)
MN05006001Z SmartWire-DT Module Manual IP20
(surface mounting, engineering, installation, etc. for the individual SmartWire-DT modules)
MN120006 SmartWire-DT Module Manual IP67
(surface mounting, engineering, installation, etc. of the single SmartWire-DT slaves,
I/O modules IP67)
MN04802091Z User Manual XSoft-CODESYS: PLC programming XV100
(Use of the PLC programming tool XSoft-CoDeSys-2 and the PLC runtime system for the XV100
device type with Windows CE)
The documents can be downloaded from:
www.eaton.eu/doc (search for the document number using the search field on the home page)
www.eaton.com (search for the document number using the search field on the home page)
CAUTION
Not galvanically isolated SmartWire-DT system
The device may be damaged by potential differences.
Provide a common star point for the earth wiring.
