Eaton XV-102 Series, Manual

Page: 38 / 80

5 Installation
5.3 Interfaces
36
Touch display XV-102 10/2020 MN04802004Z-EN Eaton.com
5.3.8.2 Operating and indication elements of the SmartWire-DT master interface
Tab. 12 Operating and indication elements of the SmartWire-DT master interface
Fig.. 18 SmartWire-DT master interface
Element Function
A POW/AUX interface Power supply interface for SmartWire-DT
(

Chapter 5.3.8.3,

37)
B POW-LED Lit if the SmartWire-DT network is supplied with current.
C SWD-LED Indicates whether the physical configuration of the SmartWire-DT
network matches the target configuration stored in the device. The
configurations are compared every time the power supply is switched
on (

Chapter 5.3.8.5,

39).
D Config-LED Indicates whether the SmartWire-DT master project configuration
defined in the PLC matches the SmartWire-DT network target configu-
ration stored in the device. The configurations are compared every time
the power supply is switched on (

Chapter 5.3.8.5,  39).
E Configuration button Configure SmartWire-DT network.
F SWD Interface SmartWire-DT interface (

Chapter 5.3.8.4,  38)