8. Faults
8. Faults
This section provides troubleshooting information for your XP-504 in case it does not
behave as expected.
Fault
Cause
Remedy
Panel PC will not boot up
No 24 VDC power supply
Check the power cord and
power supply
The display stays dark
Dimmed brightness
If the brightness setting has not
been dimmed, the device will
need to be repaired
The Projected Capacitive Touch
(PCT) is not responding or is
responding incorrectly when
used.
The touchscreen display is soiled
Clean the display
The set screws are too tight
Loosen the set screws → page
42
XP-504
08/2021 MN048028EN Eaton.com
76
Summary of Contents for XP-504
