Eaton XP-504, Manual, Page: 36 / 98

3. Installation
3.3 Unpacking and checking the equipment supplied
3.3 Unpacking and checking the equipment supplied
Check the packaging for transit damage.
Carefully remove the packaging in order to avoid damaging the device.
Check the package contents for visible transit damage.
Use the information in the → "Std. packPanel PC", page 37 table to make sure
that the contents are complete.
Keep the original packaging so that you will be able to use it in the
future if you need to transport or ship the Panel PC.
Make sure to also keep the documents enclosed with the device
and/or to give them to the end customer.
Missing parts or damage
If you notice anything wrong, please contact your distributor or
Eaton S1 877-386-2273 (en) / 877-ETN-CARE (877-386-2273)
The package for the HMI comes with:
Unit Description
1 x
XP-504-...
1 x Plug connector MSTB 2.5/3-ST-5.08
1 x Installation instructions IL048016ZU
Holding bracket with set screw
Internal hexagon M 4 x 25 DIN 914 galvanized
8 x XP-504-10-...
10 x XP-504-15-...
12 x XP-504-21-...
Tabel 6: Std. packPanel PC
The HMI is sturdily built, but the components inside it are sensitive to excessively
strong vibrations and/or mechanical shock.
Accordingly, make sure to protect the XP-504 from mechanical loads that exceed the
scope of the unit's intended use.
The device should only be transported in its original packaging after being packed
properly.
37
XP-504 08/2021 MN048028EN Eaton.com