Eaton XP-503, User Manual

Page: 5 / 70

1 General
1.1 Purpose of this manual
XP-503
12/2014 MN048014-EN www.eaton.com
5
1 General
1.1 Purpose of this manual
This manual contains all the information you will need in order to use the XP-503 panel PC safely and effectively. The
manual is considered an integral part of the device and must always be readily available in the
device's close proximity.
This manual describes all the lifecycle stages for the device: transportation, installation,
commissioning, operation, maintenance, storage, and disposal. It does not, however, go over its
operating system or application software.

Before working with the device, make sure to read chapter 3, "Safety instructions".
Chapter 3 contains important information regarding your own personal safety, and
must be read and understood by everyone who will be working with the device.
WARNING
Incomplete manual copies
Working with individual pages taken out from the manual may lead to bodily injury
and property damage due to missing safety information.

Always work with the full document.
1.2 Comments about this document
Please send any comments, recommendations, or suggestions regarding this document to
info-automation@eaton.com.
1.3 Additional documentation
The following documents may also be helpful in relation to the use of this device:
[1] MN05010009Z-DE System Description Networks in Brief
(information on networks in general and on how to integrate PCs and panels into
networks)
These documents can be downloaded at:

www.eaton.eu (search for the document number using the search field on the home page)

www.eaton.com (search for the document number using the search field on the home page)