5 Commissioning and operation
5.5 Safety Warnings
XP-503 04/2020 MN048014 EN Eaton.com
41
WARNING
Performing gestures incorrectly on the touch panel with multi-touch
capabilities
If gestures are performed incorrectly on the touch panel with multi-touch capabilities,
they may not be recognized or they may be recognized incorrectly. When this
occurs, the device will either not respond to the operator's input or will respond in a
wrong or unexpected way.
Observe the following when using the touch panel with multi-touch capabilities:
The touch panel responds to contact on its surface, not to pressure.
If using a stylus:
Make sure to specifically use a capacitive touch panel stylus.
If using your fingers:
- Make sure to only use your fingertips.
- Do not use your fingernails to operate the touch panel.
Do not use thick gloves when operating the touch panel,
e.g., work gloves.
You may wear the following types of gloves:
- Thin cotton gloves,
- Rubber-coated gloves
- Latex gloves
- Capacitive touch panel gloves
Touch the touch panel perpendicularly, not at an angle.
Make sure you do not touch the screen accidentally,
e.g., with your knuckles or by leaning against the display or using it for support.
Make sure to always keep the touch panel clean.
Always check to make sure that the device has recognized the operator actions
you have entered.
5.5.1
Commissioning
Windows operating system
Note:
Taking appropriate precautions will make it possible to prevent other malfunctions
while the device is running.