0 About this manual
0.1 List of revisions
XN300 slice modules
06/16 MN050002 EN
www.eaton.com
11
0 About this manual
This manual describes the installation, commissioning and programming of
the XN300 slice modules.
The XN300 slice modules are an integral part of the XN300 system, as is the
gateway with designation XN-312-GW-CAN.
Support center
The latest version of this manual can be found in other languages on the
Internet by visiting our Support Center at:
http://www.eaton.eu/documentation
By entering the search keyword "XN300" into the quick search or by entering
the document designation, e.g. "MN050002".
For more information on the XN-312-… gateway, please refer to the follow-
ing documents:
•
Manual „CANopen Gateway XN312-GW-CAN“, MN050003.
Download Center
EDS files, the XN-300 Assist engineering tool, the XSOFT-CODESYS-2 and
XSOFT-CODESYS-3 software described in this manual, and updates for the
operating system for XN-312-… can all be downloaded from the
Eaton Download Center on the Internet at:
Additional information
To get the latest XN300 library version for XN300 slice modules, please send
an e-mail to the following address:
or
0.1 List of revisions
The following significant changes have been incorporated since previous
issues:
Publi-
cation
date
Page
Keyword
New
Changes
02/16
150
Use of 3 k
Ω
potentiometer
✓
152
Technical data for reference outputs
✓
235
The following chapter was revised
✓
Summary of Contents for XN300
Page 4: ...II...
Page 14: ...10 XN300 slice modules 06 16 MN050002 EN www eaton com...