1 About this manual
1.2 Description of symbols used
10
XI/ON: XNE-GWBR-2ETH-IP
09/2011 MN05002007Z-EN
www.eaton.com
1.2
Description of symbols used
Warning
This sign can be found next to all notes that indicate a source of hazards. This can
refer to danger to personnel or damage to the system (hardware and software) and
to the facility.
This sign means for the operator: work with extreme caution.
Attention
This sign can be found next to all notes that indicate a potential hazard.
This can refer to possible danger to personnel and damages to the system (hardware
and software) and to the facility.
Note
This sign can be found next to all general notes that supply important information
about one or more operating steps.
These specific notes are intended to make operation easier and avoid unnecessary
work due to incorrect operation.
