![background image](http://html1.mh-extra.com/html/eaton/xcomfort/xcomfort_technical-information_3872469002.webp)
RF System - Overview of functions
Setting in “BASIC MODE”
In “Basic Mode” the functions of the devices can be assigned through activating the programming button and the respective push-button. Easy,
without any complicated tools, PC or setting of DIP-switches etc.
Increasing the range through „Routing“ (see Comfort Mode) is not possible in Basic Mode.
Install the actuator in the
flush box and connect it
Activate the programming
button (the red LED and the
connected lamp are
switched ON)
Push the corresponding
push-button (the red LED
and the connected lamps
flash twice for confirmation)
Activate the programming
button a second time to
finish the process (the LED
and the connected lamp are
switched OFF)
Setting in “COMFORT MODE”
Comfort Mode offers the opportunity for detailed and comfortable settings (e.g. operating time of shutters, time functions, flash functions, functions with
command time, dimmer settings, settings for temperature sensors and much more).
All you need is a notebook/laptop. The free setting-software is easy to understand and clearly structured, so all the user has to do is to deal with the set-
ting jobs as such.
If the system was first programmed in „Basic Mode“ and the push-buttons were assigned to certain actuators, the functional connections are depicted as
a single “line” when the system is read in. Detailed settings and adjustments can be made at any time ...
If no functions have been assigned yet, “Comfort Mode” enables you to assign a function by simply “drawing” a line between the actuator(s) and the
sensor(s) on the screen.
The devices can also be given names which are (and stay) memorized in the devices.
If one day the range should not be sufficient while taking the system into operation, the notebook/laptop will automatically and in the background calcu-
late the routing (forwarding of data via actuators, for example).
1
2
3
4
MRF for Residential Buildings
CLICK
CLICK
MRF for Light Commercial Buildings
Enhancements in the MRF
• Modern and revised layout and design
• Code for professionals is generally unlocked
• Cancel and reset function
• Improved and faster reading of system pass words
• Improved reading and loading, shorter response times, re-naming while reading
• Reading of project parts, succession of reading/loading/quality of reception can be selected
• Adding of a background picture (bmp, jpg, gif, ...)
• Adding of project notes
• Adding of notes on each individual device
• Adding of grouping frames
• Enhanced documentation options
• Zoom function for large projects (50%, 100%)
• Enhanced selection mode for Copy/Delete/Shift
• Adding and configuration of virtual devices from a data base
• Easy connection assistant with an additional option for configuration
• Copying of projects and parts of projects
• „Manual“ selection of routing
• Project topology for large projects - unambiguous project structure
3
2
Switching Actuator
switches lights, pumps,
ventilation and heating systems,
saunas, ... any electrical
consumer
Shutter Actuator
for controlling blinds,
shutters, mixing values, etc.
Binary Input Unit
for integrating conventional
switches, window contacts
and signal contacts
Adapter Plug
switches and dims living room
fountains, aquaria, etc.
Smart Dimming
Actuator
switches and dims lights
and light environments
Push-button Unit
for lighting, shading, etc.
PIR Motion Sensor
controls lights depending on
movement and brightness
Router
redirects information
when direct transmission
is not possible
Heating Actuator
for electrical heating with
energy measurement
Temperature
Input Unit
measures temperature
and controls shading
and heating
Room Controller
Touch
regulates and controls
heating and shading
Smart Home
Controller
centrally operating and
reporting via smart phones
and tablets
Room -Manager
the operating and display
unit - easy to handle and
easy to read
Bridge
Enables easy configuration
and remote control of lighting
via smartphone using the
xComfort Bridge App.
Analogue Actuator
switches and dims lights
and light environments
Remote Control
controls lights, shading and
other electrical consumers
Sensors
receive different information,
with alarm option
e.g. smoke alarm,
motion detector
Door/Window
Sensor
A wireless slimline
sensor for monitoring
doors and windows
and activating home
functions
Analogue Input
receives data from universal
sensors for further processing