manualshive.com logo in svg

Eaton Wright-Line TechOrganizer Corner, Manual, Page: 4 / 4

Share
Download
Eaton Wright-Line TechOrganizer Corner Manual Download Page 4

4

T e c h O r g a n i z e r
I n s t a l l a t i o n   o n
P h e n o l i c   C o r n e r  
T e c h B e n c h  

  4. Using the holes in the feet as a template, locate and 
      drill four .218 dia. holes 

thru

 the worksurface.  Attach 

      the feet to the worksurface using the four #10 x 1.25”
      phillips pan head machine screws, #10 washers, #10-
      32 lock nuts and #10-32 acorn nuts provided.  See 
      figure 2.

Figure 2

TechOrganizer

#10 x 1.25” phillips 
pan head machine screws

#10-32 lock nuts

#10-32 acorn nuts

#10 washers

Foot

85081

Summary of Contents for Wright-Line TechOrganizer Corner

Page 1: ...rfaces 400 lbs Workbenches Do not install shelves that are greater than 18 deep Do not install shelves more than 35 above the Work surface 1 Assemble Left hand and Right hand Organizer frames to the Corner post with the 1 4 20 x 1 5 8 Button head cap screws provided See Figure 1 Corner TechOrganizer Figure 1 R H Organizer frame L H Organizer frame Corner post 1 4 20 x 1 5 8 Button head cap screws ...

Page 2: ... Worksurface See Figure 2 NOTE If the feet are not 90 to the frame tap the ends with a plastic mallet to correct 4 Attach the frame bottom crossbar to the worksurface using the 10AB x 2 25 Phillips head flat head screws provided See Figure 2 5 Attach the feet to the Worksurface using the four 10AB x 75 Phillips pan head screws provided See Figure 2 20 Linx worksurface with full depth uprights Corn...

Page 3: ...that are greater than 18 deep Do not install shelves more than 35 above the Work surface 1 Position the Corner TechOrganizer in the desired location on the back of the Phenolic worksurface See figure 1 2 Using the holes in the frame bottom crossbars as a template locate and drill the appropriate quantity of 164 dia holes 650 deep in the worksurface See figure 1 NOTE If the feet are not 90 to the f...

Page 4: ...ate locate and drill four 218 dia holes thru the worksurface Attach the feet to the worksurface using the four 10 x 1 25 phillips pan head machine screws 10 washers 10 32 lock nuts and 10 32 acorn nuts provided See figure 2 Figure 2 TechOrganizer 10 x 1 25 phillips pan head machine screws 10 32 lock nuts 10 32 acorn nuts 10 washers Foot 85081 ...

Reviews:

No comments