Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Wheelock E70H & E90H High Fidelity Speakers & Speaker Strobes
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton
Life safety & mass notification solutions
273 Branchport Ave.
Long Branch, NJ 07740
www.eaton.com/massnotification
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. TD450018EN
January 2016
Technical Data
TD450018EN
Effective January 2016
The speaker appliances shall be Wheelock Series E70H or E90H High
Fidelity Speakers and Speaker Strobe appliances or approved equals.
The speakers shall be UL Listed under UL 1480 for Fire Protective
Service and speakers equipped with strobes shall be listed under UL
1971 for Emergency Devices for the Hearing-Impaired. In addition,
the strobes shall be certified to meet the requirements of FCC Part
15, Class A.
All speakers shall be designed for a field selectable input of either 25
or 70 VRMS, with selectable power taps from 1/8 watt to 2 watts.
All models shall have listed sound output of up to 87 dB at 10 feet
and a listed frequency response of 300 to 8000 Hz. The speaker shall
also incorporate a sealed back construction. All inputs shall employ
terminals that accept #12 to #18 AWG wire sizes. The strobe portion
of the appliance shall produce a flash rate of one (1) flash per second
over the Regulated Voltage Range. The strobe shall be of low current
design. Where Multi-Candela Speaker Strobes are specified, the
strobe intensity shall have field selectable settings and shall be rated
per UL 1971 at 15/30/75/110cd or 135/185cd for wall mount and
15/30/75/95cd or 115/177cd for ceiling mount. The selector switch
for selecting the candela shall be tamper resistant. Models with
1575 candela shall also be offered for wall-mount applications.
When synchronization is required, the strobe portion of the appliance
shall be compatible with Wheelock DSM sync modules, Wheelock
Power Supplies or other manufacturers panels incorporating the
Wheelock Patented Sync Protocol. The strobes shall not drift out of
synchronization at any time during operation. If the sync module
or Power Supply fails to operate, (i.e., contacts remain closed), the
strobe shall revert to a non-synchronized flash rate.
The speaker and speaker strobe appliances shall be designed for
indoor surface or flush mounting. The speaker and speaker strobe
shall incorporate a speaker mounting plate with a grille cover which is
secured with two screws for a level, aesthetic finish and shall mount
to standard electrical hardware requiring no additional trimplate or
adapter.
The finish of the Series EH speakers and strobe speakers shall be
red or white.
All speaker and speaker strobe appliances shall be backward
compatible.
The speaker shall be listed to the low frequency requirements of UL
464 (520 Hz) to meet NFPA’s 520 Hz tone requirements for sleeping
areas.
UL 1971, UL 1480, ULC-S526, ULC-S541, CSFM, FCC.
Note:
N
Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Cooper
Wheelock Inc., dba Eaton standard terms and conditions.
WE ENCOURAGE AND SUPPORT NICET CERTIFICATION
3 YEAR WARRANTY
Architects and Engineers Specifications
