Eaton’s Wiring Devices
Wi-Fi smart voice dimmer configuration parameters
CONFIGURATION SETTING DESCRIPTIONS
MAX BRIGHTNESS LEVEL
This indicates the brightness you would like your lights to be at when the dimmer is at its maximum level. You may want to lower this setting to
gain energy savings by reducing your lighting load. This is sometimes referred to as “high trim level”.
When editing this setting, your lights will adjust in real time and the LED indicator bar will indicate the current output dimming level. You can fine
tune the exact brightness level you desire for this setting.
NOTE –
The Max Brightness Level setting cannot be lower than the Min Brightness Level setting.
MIN BRIGHTNESS LEVEL
This indicates the brightness you would like your lights to be at when the dimmer is at its minimum level. You may want to increase this setting
in order to reduce flickering that sometimes occurs at low dim levels for some bulbs. This is sometimes referred to as “low trim level”.
When editing this setting, your lights will adjust in real time and the LED indicator bar will indicate the current output dimming level. You can fine
tune the exact brightness level you desire for this setting.
NOTE –
The Min Brightness Level setting cannot be higher than the Max Brightness Level setting.
POWER UP STATE
This feature allows the user to change the Power Up State of the voice dimmer when the power is restored after an outage.
LED INDICATOR BAR BRIGHTNESS
This indicates how bright you want your LED indicator bar indicator to be. You may want to adjust this setting if you feel the LED indicator bar is
too bright in a dark room or if you want it brighter to see better. As you adjust this setting, the LED indicator bar will change its brightness in real
time to reflect its value.
Light Bar Indicator
Setting Value
Description
Off
The device will always remain OFF when power is restored.
Last State
The device will return to previous state when power is restored.
On
The device will always turn ON when power is restored.
Light Bar Indicator
Setting Value
Description
Min
The LED indicator bar is approximately 25% brightness.
Low
The LED indicator bar is approximately 50% brightness.
High
The LED indicator bar is approximately 75% brightness.
Max
The LED indicator bar is at 100% brightness.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2021 Eaton
All Rights Reserved
Printed in USA
Publication No. PA610010EN
January 2021
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Electrical Sector
203 Cooper Circle
Peachtree City, GA 30269
United States
Eaton.com
Eaton.com/smarthome
Configuration Settings
LED Indicator Bar
Configuration Setting
Default Value
Options
Max Brightness Level
100%
10-100%
Min Brightness Level
1%
1-90%
Power Up State
Off
Off, Last State, On
LED Indicator Bar Brightness
High
Min, Low, High, Max
Ramp Rate Time
3 seconds
0, 1, 2, 3, 4, 5 seconds
