4
Indicator Overview
Control and Indicator Overview
All controls for the VORAD system are located on the Driver Display.
Figure 2
Item
Description
Volume Control
and Power On/
Off
Power can be turned on or off by pushing in the control knob.
Volume level can be adjusted by rotating the control knob.
Activates “Failure Display Mode” when the knob is pressed in
and held for five (5) seconds and then released. (See Figure 2)
Range Control
and Accident
Recorder
The control knob provides distance adjustment of the Always
Alert warnings. When SmartCruise is active, rotation of the
knob will also change the following interval from 3 to 2 sec-
onds. Accident data is stored by pushing and holding this
knob for 5 seconds thereby freezing the most recent event
data in half of the allocated memory.
Red,
System Fault
Illuminates when a problem has been detected in the
forward-looking radar system. A pattern of flashes blink
out the faults that are stored in memory when activated
by holding in the volume control knob for five seconds.
(See page 15.)
Green,
SmartCruise
Green light comes on when SmartCruise is actively controlling
the vehicle speed.
FAIL
ON
S/C
Warning Level
Range
Volume
Green, SmartCruise
Light Sensor
Red
Orange
Yellow
Red, System
Failure
Green,
Power ON
Volume Control
Power ON/OFF
Speaker
Range Control/
Accident Recorder
EATON VORAD
