4
EATON CORPORATION Fluid Power
Test Procedure to Evaluate Fluids in Piston Pumps Technical Data V-PUPI-TS022-E March 2009
Figure 3
Disassembly and
Inspection
Disassemble the pump per
Vickers Overhaul Manual
M-2210-S, Figure 3. Identify the
pistons and respective bores in
the cylinder barrel per Figure 4
for re-assembly into the same
location.
NOTE: In millimeters, measure cylinder barrel
bores and piston OD to three decimal places
(four decimal places if measuring in inches), and
dimensions ‘A’ and ‘B’ to two decimal places
(three decimal places if measuring in inches).
Record information on a blank Piston/Bore
Record (pages 14 and 15).
Figure 4