Eaton SU700XLCD, User Manual, Page: 18 / 52

12 Tripp Lite by Eaton SmartOnline Series User Guide 614-21326—Rev 01
44..22 LLC CD D D Deessccrriippttiioonn
The LCD screen has 2 lines, each line has 16 characters. The first line shows UPS status, the second line shows measures.
After 5 minutes of inactivity, the LCD displays the screen saver, and the LCD backlight automatically dims. Press any button to
restore the screen. Note: If fault or alarm appears, the first line of LCD will cycle between fault/alarm message and UPS mode,
see troubleshooting page for additional information.
Figure 9. LCD Description
LCD mode description Load/equipment status
ONLINE MODE
LOAD:100% 2700W
ESC
The following table describes the status information provided by the UPS
Note: If other indicator appears, see the troubleshooting for additional information.
Table 4. LCD Operating Modes
UPS Display Description
STANDBY MODE
IN:120V 60.0HZ
Equipment is not powered until button is pressed. The UPS
is Off, waiting for startup command from user.
LOAD:100% 3000VA
ONLINE MODE
The UPS is powering and protecting the equipment. The UPS is
operating normally.
RUNTIME:104MIN
BATTERY MODE
A utility failure has occurred and the UPS is on Battery mode.
The UPS is powering the equipment with the battery power.
Prepare your equipment for shutdown.
LCD Description