Eaton StructuredWiringSolutions ESWV10400 Installation Manual Download Page 2

Page: 2 / 2

Connecting the ESWV10400/ESWV10800

Connecting Incoming Television or Cable TV to the
Coaxial Distribution Module

1. Run a RG6 coaxial cable from the video source (antenna or cable

TV D-marc) location to the ESWV10400 or ESWV10800.

2. Connect the RG6 cable to the RF input located on the rear of the

coaxial distribution module. See

Figure 1

3. Connect the RG6 coaxial cable running to the various room

locations to the coaxial connectors on the front of the module
marked Outputs. See

Figure 2

Connecting to Satellite Signals

1. Run two, three, or four RG6 cables from the satellite dish to the

ESWV10400 or ESWV10800 modules and connect the cables to
the SATV connectors on the rear. See

Figure 1

2. Connect the RG6 cables running to the various satellite receiver

(room) locations to the inputs on the front of the ESWV10400 or
ESWV10800 module. See

Figure 2

FIGURE 1.

FIGURE 2.

Input

SATV
Connections

Outputs to Room Locations

Four Pass-Through
Connections for SATV

Summary of Contents for StructuredWiringSolutions ESWV10400

Page 1: ...ht locations Four pass through connections for satellite TV distribution Passes infrared signals Bi directional for digital and HD video signals Passive Coaxial Distribution Modules m CAUTION INSTALLA...

Page 2: ...ee Figure 1 3 Connect the RG6 coaxial cable running to the various room locations to the coaxial connectors on the front of the module marked Outputs See Figure 2 Connecting to Satellite Signals 1 Run...