10
Instruction Booklet
IB158007EN
Effective September 2016
Installation instructions for Eaton SPC series
surge protective device (SPD)
EATON
www.eaton.com
12 Warranty
Eaton warrants the SPC to be free from defects in both workman-
ship and materials for a period of five years, ten years if the product
is properly registered, from the date of delivery to the purchaser . To
register, go to www .eaton .com/spc and click on the warranty regis-
tration icon .
Eaton assumes no risk or liability for results of the use of the prod-
uct purchased, including but not limiting the generality of the forego-
ing:
(1) The use in combination with any electrical or electronic compo-
nents, circuits, systems, assemblies or any other materials or sub-
stances .
(2) Unsuitability of any product for use in any circuit or assembly .
Purchaser’s rights under the warranty shall consist solely of requir-
ing Eaton to repair, or at Eaton’s sole discretion, replace, free of
charge, F .O .B . factory, any defective items received at said factory
within said term determined by Eaton to be defective . The giving of
or failure to give any advice or recommendations by Eaton shall not
constitute any warranty by or impose any liability upon Eaton AND
IS IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESSED,
IMPLIED OR STATUTORY AS TO THE MERCHANTABILITY, FITNESS
FOR PURPOSE SOLD, PRODUCTIVENESS OR ANY OTHER
MATTER . In no event shall Eaton be liable for special or consequen-
tial damages or for delay in performance of the warranty .
This warranty does not apply if the unit has been misused, abused,
altered, tampered with, or applied in excess of the specifications
other than those written on the nameplate . At the end of the war-
ranty period Eaton shall be under no further warranty obligation
expressed or implied .
The Eaton SPC covered by this warranty certificate can only
be repaired or replaced by the factory . A RETURN MATERIAL
AUTHORIZATION (RMA) number must be obtained . Please enter
a Vista warranty claim by contacting your local authorized Eaton
Distributor or the Eaton Technical Resource Center at 1 800 809-
2772 option 4, option 2, or email spd@eaton .com for help entering a
claim or to obtain an update on your claim status . Repair or replace-
ment will be returned collect . If it is determined that the returned
product contains manufacturer’s defects then Eaton will replace the
defective product at Eaton’s expense (including shipping charge) .