Control panel
(1) Operation status
(2) Battery status
(3) Efficiency and load group information
(4) Load/equipment status
By default, or after 5 minutes of inactivity, the LCD displays the
screen saver.
The backlight LCD automatically dims after 10 minutes of
inactivity. Press any button to restore the screen.
The following table describes the status information provided by the
UPS.
Icon
Operation
status
Possible cause
Action
Standby
mode
The UPS is
off, waiting for
the start-up com-
mand.
Press the Power but-
ton to start the UPS.
Normal
mode
The UPS is operat-
ing normally.
The UPS is powering
and protecting the
equipment.
3.1.2
3
Description
16
Uninterruptable power supply (UPS) | Instructions for Use
Print No. HC-C2-X05.610.64.01.02
