3
1. Important Safety Instructions
SAVE THESE INSTRUCTIONS
All sections of this manual contain instructions and warnings that should be followed during the installation and use of
the SmartRack Modular Data Center described in this manual. Read all instructions and warnings thoroughly before
attempting to move, install or use the SmartRack Modular Data Center equipment as described in this manual. Failure
to comply will create a risk of personal injury and property damage and may invalidate the warranty.
1.1 Explanation of Symbols
DANGER
indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
indicates a potentially hazardous situation which, if not avoided, can result in death or serious injury.
CAUTION
indicates a potentially hazardous situation which, if not avoided, can result in minor or moderate injury.
1.2 Cooling Enclosure Warnings
• Only qualified personnel may install, operate, maintain and service this equipment.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by person responsible for their safety. Children should be supervised to ensure that they do not
play with the appliance.
• This appliance is classified as
APPLIANCE NOT ACCESSIBLE TO THE GENERAL PUBLIC
. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard. The appliance shall be installed in accordance with national wiring regulations
• The user must install a user-supplied residual current device (RCD) with an all-pole disconnection device with at least
0.118 in. (3 mm) separation distance and a rating of above 10mA into the fixed wiring according to national and local
electrical codes.
Handling Information
CAUTION
Hazard of electric shock, explosion or arc flash:
• Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices.
• This equipment must be installed and serviced by qualified HVAC personnel only.
• Comply with all local and national wiring and safety regulations applicable where unit will be installed, e.g. National
Electric Code (NEC) in the United States.
• Turn off all power supplying this equipment before working on or inside of the equipment.
• Always use a properly rated voltage sensing device to confirm power is off.
• Replace all devices, doors and covers before turning on power to this equipment.