30
EATON CORPORATION
www.eaton.com
Montageanweisung für Series NRX
Ethernet Kommuniactionsmodul
Instruction Leaflet
IL01301052E
gültig ab Mai 2012
Firmware
Führen Sie die folgenden Schritte aus, um eine neue firmware auf das ECAM zu laden:
1. Die neueste Firmware muss auf Ihrer Festplatte gespeichert sein.
2. Klicken Sie auf die Schaltfläche <Upload Firmware> und wählen Sie die Firmwaredatei aus
3. Doppelklicken Sie auf den Dateinamen oder klicken Sie auf die Schaltfläche <Open>, um die Datei herunterzuladen.
4. Dieser Vorgang kann einige Minuten lang dauern. Wenn die neue Firmware geladen ist, werden Sie aufgefordert mit einem Klick auf die
Schaltfläche <Yes> die Aktualiserung zu bestätigen und den Vorgang damit zu beenden.
5. Klicken SIe auf <Yes> um das ECAM neu zu starten. Dieser Vorgang kann bis zu zwei Minten dauern.
nmerkungg:
A
Die Firmwareseite bietet auch die Möglichkeit über die entsprechende Schaltfläche alle Konfigurationsdaten vom ECAM-Speicher zu löschen. Sobald der
Befehl gegeben wurde, werden alle Daten gelöscht.
Screenshot 23. Firmware-Konfigurationseinstellungen