![background image](http://html1.mh-extra.com/html/eaton/sefelec-cxs40/sefelec-cxs40_operating-manual_526969057.webp)
XS series operating manual
XS user manual v0.55
- 56 -
8 Dielectric strength test (hipot test)
From the initialization menu press on the [HIPOT] or on the [FUNCTION] then [HIPOT] function key to
get the menu shown in figure 9.1.
The main test parameters are recalled on the bottom line of the LCD screen.
Fig 8.1
Setting
To modify these parameters, press on the [PARAM] function key of this menu. If the message
[ACCESS DENIED] is displayed, please refer to section PARAMETER ACCESS CONTROL
Then the display shows:
Fig 8.2