Effective July 2010
Supersedes April 2010
Installation Leaflet
IL04209006E
PROFIBUS Module for use with
Motor Insight, C440 and S611
Installation
The PROFIBUS module is designed to be used in
industrial applications and installed in accordance
with this document.
Mount the Module
To mount the
PROFIBUS
adapter to Motor
Insight
®
or C440-COM-ADP the following pro-
ceedure must be preformed.
•
Place the tabs opposite the PROFIBUS con-
nector into the lower slots provided on the
Motor Insights right side.
•
Pivot the module on the lower tabs toward
the Motor Insight.
•
Gently press the module and Motor Insight
together.
Connect the PROFIBUS Adapter to PROFIBUS
Connect the PROFIBUS terminal to the PROFIBUS
DB9 connector located on the side of the module.
The connector has screws for positive retention to
eliminate accidental unplugging.
Connect 24 Vdc control power to the 5-position
header.
•
The connector has screws for positive reten-
tion to eliminate accidential unplugging.
•
Use one wire per terminal.
Set the PROFIBUS address
The PROFIBUS address is set using the DIP
switches located on the face of the module. The
PROFIBUS address is binary with the major units
numbered to the left of the switch on the side
label. Adding up the major units set to ON deter-
mines the address of the module.
Example
: To set the address to 25, start from the
switch mark 32 and set the switches to Off (32),
ON (16), ON (8), OFF (4), OFF (2) ON (1) (16+8+1
=25).
Note: Address is only updated upon power up.
The PROFIBUS baud rate is set automatically
using an auto baud technology, there is no need
to set the baud rate. For more information on the
PROFIBUS attributes and how to modify them,
refer to the appropriate user manual. Motor Insight
MN04209001E, C440 MN04201001E or S611
MN03902011E.
The GSD file is located on the Eaton web site, go
to www.eaton.com.
C441S - 120 Vac Input Specification
Specification
Value
Number of Inputs
4
Nominal Voltage
120 Vac
Nominal Current
15mA
Operating Frequency
50/60Hz
Signal Delay max.
30ms
Input type
IEC 61131-2
Type 1 Digital
C441Q - 24 Vdc Input Specification
