Eaton RF System 2.42, Manual, Page: 55 / 244

55 Eaton RF-System
© 2015 Eaton Electrical Group
New since V2.41:
The range of the previously displayed good reception quality has been split to a very good and a
good range just for displaying purpose and better differentiation.
Use selection mode to display the reception quality of a specific group.
Shortcuts
Keyboard: F10
To display the reception quality of a particular device, please use the Drop Down menu.
Display router
It is possible to display routers. All devices which have routing paths entered are assigned a
different icon (router icon). The colour of the router icon indicates router usage.
1-5 routing paths -> green router icon
6-12 routing paths -> orange router icon
13 routing paths -> red router icon; In this case the Router is full if the device is an actuator
of the old generation. Actuators of the new generation are at 50% maximum capacity.
You can also delete the reception quality between two routers in the router view. This may be
helpful if there are two routers in the direct vicinity which have to share routing paths - in such a
case it is better if the two routers don't understand each other.
A reception quality line between two routers can be deleted by right-clicking on a line and on the
option "Disconnect router".
By clicking again on Menu -> View -> Display router, you can change this view again.
Enter topic text here.
Commands of the Help ( ? ) Menu
The Help menu includes the following commands, which offer you support for this application:
Help Topics Displays the list of topics help is available for
About MRF… Displays the version number of this application
The Command Info (Help Menu)
Use this command to display the Copyright note and the version number of your Eaton RF system
copy.
xComfort Devices
Switching actuator 10A/16A
Switching Actuator
Dimming Actuator
Shutter Actuator
Push-button