Eaton RF System 2.42, Manual

Page: 22 / 244

22 Eaton RF-System - Help
© 2015 Eaton Electrical Group
By right-clicking in the workspace where one or more group frames are present, a pop-up menu
will appear in which a frame and its title can be further edited using an expanded menu.
The following options are available:
· Delete group frames: Removes the selected frames from the project
·
Change size and position: Unlocks the frame so that the size and position can be changed
with the mouse; the frame is relocked by selecting this option again
·
Rename group frame...: The title of the group frame can be edited
All group frames in the project can be shown or hidden by going to menu options View -> Group
frames or by Right-clicking in the workspace -> Display group frames.
Insert MRF project
This function offers the option of inserting devices (incl. all settings) from an already-existing MRF
project into your current project.
When doing this, the user can choose whether the devices are to be inserted as real devices or as
virtual devices.
The following conditions must be present:
-) all devices in the project to be imported must be known and fully scanned (no question marks)
-) the project to be imported may not include any devices with the same serial number as devices
in the current project (not with virtual devices)
-) the project to be imported must have been created with the same or an older MRF version than
used in the current project
What is imported:
-) devices, their names and complete device configuration