148
Eaton RF-System - Help
© 2015 Eaton Electrical Group
The control of the operation mode is done by the Room-Manager (timer program or manual). It can
be defined if the actual temperature and set value preset is given b the Room-Manager or the
radiator.
In this mode window contacts must only be assigned to the room of the Room-Manager and not to
the heating actuator separately.
You can also set how the heating actuator will react after a power failure.
‘Backup mode’ – As long as no new control commands or temperature commands are received by
its assigned devices all control commands will come from the connected radiator.
‘old value’ – It does axaclty the same than before power failure until new commands and
temperature are received
BOS/COS Interface
The BOS/COS interface has the purpose to integrate occupancy sensors such as bed- or
chair-occupancy sensors in the Eaton RF System especially for the Elderly care function.
The device is mains supplied and contains of 2 RJ11 jacks to which the sensors can be
Summary of Contents for RF System 2.42
