RE SERIES_ RevA
3/5/2022
v
2
I
•
Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants, dust and direct sunlight.
•
Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation
openings of the enclosure.
•
The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a mechanical
device such as a forklift or pallet jack to move the enclosure in the shipping container.
•
Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.
•
Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.
•
Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible. The casters are designed for
minor position adjustments within the final installation area only. The casters are not designed for moving the enclosure over longer distances.
•
The casters are not designed to provide long-term support for the enclosure after final installation. Use the levelers to provide long-term support.
•
Install the enclosure in a structurally sound area with a level floor that is able to bear the weight of the enclosure, all equipment that will be installed in
the enclosure and any other enclosures and/or equipment that will be installed nearby.
•
Install the cabinet securely to the building structure, using the shipping brackets as illustrated in the
Enclosure Installation
section of this manual.
•
Do not push the enclosure from the side panels to move it. Pushing from the side panels will cause a tipping hazard.
•
When rolling the enclosure on its casters, always push it from behind, never pull it toward you.
•
A rolling enclosure can cause personal injury and property damage if not properly supervised. If rolling the enclosure down a ramp is required, use
extreme caution. Do not attempt to use ramps that have a slope steeper than 1:12.
•
Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.
•
Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage that will
void the warranty.
•
Do not re-ship the enclosure with additional equipment . The combined weight of the enclosure and installed equipment must not exceed the load capacity of the
pallet. Eaton is not responsible for any damage that occurs during re-shipment.
•
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not recommended.
All sections of this manual contain instructions and warnings that should be followed during the installation and use of the Eaton RE Enclosures
in this
manual. Failure to comply will create a risk of personal injury and property damage and may invalidate the warranty.
