For detailed information concerning the operation and features
available in the PXMP meter display - 6” color touchscreen (PXMP-
DISP-6-XV), please refer to PXMP meter color touchscreen display
Features (IB150022EN) available on the Eaton website (www.eaton.
com/meters).
Figure 1. Color touchscreen display for PXMP series meter.
Figure 2. PXMP-DISP-6 cut out dimensions.
Effective June 2019
Technical Data
TD150030EN
PXMP display quickstart guide
Installation
1. Disconnect and lockout all power to the enclosure.
2. Inspect the enclosure door to determine the best mounting loca-
tion for the PXMP display.
otee:
N
A minimum clearance of 1.18 in. (30.0 mm) must be maintained
between the ventilation holes in the back of the display and any other
component within the enclosure.
3. Use the mounting template to mark the cutout area on the
enclosure door. Cut out the marked area.
4. Insure proper gasket placement on the PXMP display.
5. Insert PXMP display through the cutout.
6. Fit the supplied threaded pins in the retaining brackets. The tips
of the threaded pins must point towards the wider ends of the
retaining brackets. Clip on the retaining brackets in the recesses
provided for them on the device.
7. Check for proper alignment of the PXMP meter color touch-
screen display. Then fix the device by torquing the threaded pins
to 0.1 Nm (0.86 lb-in) with a 2mm hexagonal screwdriver. The
front of the display should be flush with the surface of the con-
trol cabinet at the fixing points.
