Eaton Corporation Page 14 Ver 1.1
5. Installation of Eaton Grid-Tied PV Inverter
5.1 Open the packing
A. 1 x Eaton Gird-Connected PV Inverter
B. 1 x Mounting Bracket
C. 1 x Accessories Box
i.
1 x User Manual
ii.
6 x M4 Mounting screws
iii. 6 x Mounting anchors
iv. 2 x M4 Safety-lock screws
v. 1 x Female fault signal connector
vi. 2 x PV238 Name Plate (Only available for PV240 model)
IMPORTANT
For PV240 model, user will be able to use manual function of dip
switch in order to modify power the PV240 into 3800W output.
This is why there are 2 additional rating labels included in the
accessories box for the PV240 model.
5.2 Visual check the PV Inverter
It is important to check the Eaton grid-tied PV Inverter for any visible damage,
including the LCD screen. If there are visible damages can be found, please
contact the dealer or supplier immediately.
WARNING
Due to the weight of the inverter, it is recommended at least 2
people lift the PV Inverter from the packing and also for the
mounting the PV Inverter on the wall.
CAUTION
It is important to use the correct lifting point to lift the PV Inverter
from the packing, as any improper carrying and moving could
result in serious injury or damage the unit.
Warning
Any modification of the PV Inverter is not permitted. Risk of
damage can be caused by any improper modification.