Getting Started
Eaton Power Xpert Gateway PXGX PDP Card User’s Guide 164202122—Rev 1
22
6.
If you will be using Simple Network Management Protocol (SNMP), identify the physical location of the
installed card in the
System location
field. This value also displays in the banner.
7.
Enter the information to identify someone to contact with questions about this device in the
System
contact
field. For example, you can type a person's name, phone number, department, e-mail address, or
physical location.
8.
You can also modify the card's IP address, the subnet mask, and the gateway address (
IP Address
,
Netmask
, and
Gateway
fields).
9.
To test the card's network connection to other network servers, such as an SMTP server, you can ping
(request acknowledgement from) the host. Enter the IP address or hostname in the
Ping test
field and
then click
Test
.
10. Click
Apply
to save the settings or
Discard
to cancel the changes.
11. Continue to Chapter 3, “Configuring the Card” on page 23 for additional configuration options.
Important Security Information
By default, the PXGX PDP Card is configured to prevent unauthorized SNMP and Modbus TCP access by
computers that are not on the Trusted IPs/Hostnames list.
If you are using SNMP or Modbus TCP, see “Changing SNMP Access” on page 27 to add specific IP
addresses or host names of trusted computers.
