Eaton Power Xpert PXGMS, Quick Start Instructions

Page: 11 / 28

Eaton PXGMS Card Quick Start Instructions 164000208—Rev 4 7
C Chhaapptteerr 44 IInnssttaallll tthhee U US SB B D Drriivveerr S Sooffttw waarree
The steps you use to install the driver software depend on your operating system (OS). This procedure provides
instructions for installing driver software on a Windows 7 OS.
NOTE Windows 8 steps are basically the same as Windows 7, although the dialog displays
may differ somewhat.
NOTE The PXGMS and PXGX UPS cards use the same driver.
NOTE You can use either the Device Manager path or the Devices and Printers path to browse
for the driver software and install it. This procedure uses the Device Manager.
To install the driver from the Device Manager :
1. Click Start in the Start bar. Type Device in the search box.
2. Select Device Manager from the list above the search box. The Device Manager opens.
3. Locate RNDIS/Ethernet Gadget under either Other Devices or Network Adapters (see Figure 5 ).
• If you do not see RNDIS/Ethernet Gadget in either list, you do not have a cable connected to the card.
Connect the computer to the card. Go back to
Step 1 .
• If RNDIS/Ethernet Gadget is listed under Other Devices, the driver is not installed. Go to Step 4 .
• If RNDIS/Ethernet Gadget is listed under Network Adapters, a driver is installed already, but you it may
not be the most up to date driver. Go to
Step 4 .
Figure 5. Device Manager Window
4. Right-click RNDIS/Ethernet Gadget to display the menu and select Update Driver Software .