Eaton Power Xpert Gateway 200E, User & Installation Manual

Page: 70 / 212

CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE
EATON PXG200E User Manual • IM02603001E Rev 5, 11-May-2012 • Firmware Version 5.03:3835 62
Devices That Connect Directly to PXG200E
1. Click on the button (Figure 5 6 , A) in the device list of the PXG200E
configuration web page.
Figure 56
2. The drop-down menu “Create Which Device” (Figure 57, A) appears.
You can either choose a category of device types or “All Device Types.” If
you choose “All Device Types,” you will be presented with an
alphabetical list of device types in
Step 8 .
3. Click on the button (Figure 57, B) to proceed to Step 5 if you are
satisfied with your selection.
4. Click on the button (Figure 57, C) to go back to Step 1 if you wish
to change the selection.
Figure 57
PXG200E_226
A
PXG200E_227
A
C
B
RETURN