Eaton Power Xpert 9395 550/275, Installation And Operation Manual

Page: 127 / 208

UPS Operating Instructions
Power Xpert
TM
9395 550/275 UPS (225–550 kVA) Installation and Operation Manual 164201716—Rev 8 www.eaton.com/powerquality 7-5
7.2.4 Using the Menu
The UPS menu bar allows you to display data in the information area to help you monitor and control UPS
operation. Table 7-2 shows the basic menu structure.
7.2.5 Mimic Screen
Figure 7-4 shows the Main Menu and Mimic screen. To select the Mimic screen from the Events, Meters,
Controls, or Setup screens, press the
ESC pushbutton on the current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real–time graphical representation
of the operating status of the system.
Figure 7-4. Main Menu and Mimic Screen (Online Mode)
Table 7-2. Display Function Menu Map
Menu Option Description
EVENTS Displays the list of Active System Events and a historical log of system events.
METERS Displays performance meters for the system or critical load.
CONTROLS Displays the System Status screen.
SETUP Allows you to set the display contrast, set the date and time for the time stamp, configure the UPS
serial communication ports, and view the firmware version numbers.
LOAD OFF De-energizes the critical load and powers down the UPS.
ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setup screens.
Returns to the main System Setup Level screen from a setup submenu.
Return arrow acknowledges or executes a command, or saves a setting.
Up and down arrows scroll through screens and lists or highlight settings.
Left and right arrows select or adjust settings displayed on the screen.
TIME: 11 : 35 : 43 DATE: 12 / 11 / 2008
CONTROL
S
LOAD OFF METERS P U T E S S T N E V E
OUTPUT
BATT
UPS
INPUT
STSW
BYPASS