7
Instruction Leaflet
IL0131080EN
Effective January 2019
3-way multi-family drawout cable interlock kit - type 32 - NF
EATON
www.eaton.com
Upper
nut
Compression
spring
38,1 mm (1,5 in)
cable tube spacer
Threaded (drive)
end (short rod)
Lower nuts
(should be shouldered
against end of thread)
Rubber boot
Outer bulkhead nut
Lock washers (2)
Bulkhead nut
Drive end cable brackets
Lock
washers
Drive lever
Compression
spring
Swivel fitting
Lower nuts
Stop at end of thread
Raise cable assembly
until threaded portion
of bulkhead fitting
enters slotted hole in
cable bracket (threads
show above bracket).
Slide smaller diameter
portion of bulkhead
fitting into cable
bracket slot.
Upper nut (tighten
against tube spacer)
Compression
spring
Swivel
fitting
Lower nuts
Upper nut (tighten
against tube spacer)
Figure 11. Details for Step 6: cable assembly drive (short rod) end mounting component identification, mounting cable assembly in
cable bracket, and cable rod attachment to drive arm
