26
Eaton PDI WaveStar BCMS Hub Installation and Operation Manual P-164001108—Rev 01
Figure 18. TIME Screen
To have the BCMS Hub use Simple Network Time Protocol (SNTP), follow these steps:
1.
Press
Time
button at the bottom of the screen. The
TIME
screen displays (
).
2.
Press the
Server
button. Enter the time server’s IP address.
3.
Press the
Zone
button. Enter the time zone offset from Coordinated Universal Time (UCT) (-4 is Eastern
Daylight time).
4.
Make sure the
Use SNTP Server
checkbox has a green check. Touch
Use SNTP Server
to toggle
between the green check (use SNTP Server) and red X (do not use SNTP Server).
5.
Press
Get
to initialize time and verify that Time Synchronization is working.
6.
Touch
Set
to confirm date/time.
7.
Touch
Save
to save settings.
44..44
A
Allaarrm
m N
Noottiiffiiccaattiioonn
When an alarm or warning is raised on any device monitored by the BCMS Hub, it is logged in the
Event Log
and an alarm or warning symbol appears on the device line on the
Home
screen. Notification of new alarms or
warnings can also be sent by email or modem dial-out as a summary alarm, indicating simply that a new alarm
or warning has occurred somewhere in the Hub’s device chain. The user should check the
Event Log
and
Home
screen for affected devices.
Summary of Contents for PDI WaveStar BCMS
