background image

Page 3

Red means Alert

Press 

Y

Secure all your windows and doors.

Make sure the system is idle, and that you can 

hear the warning tones from the keypad.

1.  Press the appropriate button on the remote 

control, either full set (A) or part set (B). 

The keypad sounds the exit warning tone.

2.  Leave by the exit door and make sure it is 

closed properly (if you have not already done 

so).

See 

Setting the System

 opposite.

Set by Two-Way Fob

Note: You must program the control unit to 

recognise (“learn”) a two-way fob, see 

the Administrator’s Guide.

If The System Will Not Set

If one of the detectors is still active when you try 

to set the system then you will not hear the exit 

warning tone.

What happens next depends on how the install-

er has set up your system.

a) Try pressing A once more on your remote 

control (or   on the two way fob). If the in-

staller has programmed the system to do so 

then it will carry on and set, omitting the ac-

tive detector.

b) If the system will not set on the second press 

of button A (or   )then you will have to go to 

the keypad and set the system from there. 

(The two way fob will flash all of its LEDs 

red.)

Dealing with Alerts  

(Why is it Beeping?)

From time to time the control unit may detect 

that there is a problem with the system. It will try 

to inform you of this by starting an alert. During 

an alert the rim of the navigation pad glows red, 

and the keypad will give an short “beep” every 

few seconds.

To see the cause of the alert:

1.  Make sure the system is unset and that the 

keypad display shows the standby screen.

2. Press 

Y

 .

The display asks you to key in an access 

code.

3.  Key in a user access code.

The bottom line of the display shows a mes-

sage describing the most recent active alert.

If you press 

 or 

 then the system will 

show you any other alerts that may be ac-

tive.

4.  

Either: 

Press 

Y

 to acknowledge that you 

have read the alert.

If there are no other alerts the rim of the nav-

igation pad will glow green and the keypad 

will return to its standby screen. In addition 

the keypad will stop beeping.

Or:

 Press 

. The rim of the navigation pad 

will stay red and the system will show the 

Secure all your windows and doors.

Make sure the system is idle, and leave the pro-

tected premises.

1.  Press the appropriate button on the fob, ei-

ther full set   or part set  . 

The LED by the button you pressed will flash 

red.

The system sets immediately.

After a few seconds the LED by the button 

you pressed will flash green to confirm that 

the system has set.

Unset by Remote Control 

1.  Enter by the designated entry door.

2. Press   on your remote control.

The system unsets. At this point the system dis-

plays the standby screen.

Unset by Two-Way Fob

1. Press  on the two way fob.

The LED by the button you pressed flashes 

red.

The system unsets.

After a few seconds the LED by the unset 

button flashes green to show that the system 

is unset.

Part Set*

Full Set*

Unset*

Query

Two-Way 

Fob

LEDs

LEDs

*In a ward-based system, 

the button sets/unsets 

only the ward the fob is 

assigned to.

(Default settings 

shown)

Reviews: