D e l u x e I n t e g r a t e d
W o r k s u r f a c e
84567
Tools Required
-5/32” Hex key (provided)
-1/4” Hex key (provided)
-Phillips head screwdriver
1. Attach the leg/modesty panel assemblies to the
Rear
Leg
with the 1/4”-20 x 3/4” Phillips pan head machine
screws provided. See
Figure 1
.
NOTE
: Depending on the height of the modesty panels
being installed, use either two or three screws
at each end.
2. Place the Worksurface on top of the top supports.
From underneath, align the holes in the top supports
and the oval holes in the modesty panels with the pre-
drilled holes in the bottom of the Worksurface. Fast-
en with the #10 Phillips head screws provided. See
Figure 2
.
3. Adjust the Glide Feet if necessary.
Figure 1
1/4”-20 x 3/4” Phillips
head machine screws
Leg/modesty panel
assemblies
Rear leg
Figure 2
Top support
#10 Phillips head
screws
Worksurface
Modesty panel
Deluxe Integrated Worksurface
technical furniture
A-5