KT TESTER
6
/ 8
2
Press the "SET" key to enter the main test menu.
Other keys are invalid.
3
Press the "ENTER" key to enter the parameter
setting and test interface, and the steps are as
shown in 4-7.
4
1
、
SET RATIO OF CT
:
1) Move to this column through "
↑
" and "
↓
";
2)Press the "ENTER" key to enter the parameter
setting state. At this time, the "=" on the left side
of the column will change to "
→
", and then adjust
the parameter to the corresponding value
through "
↑
" and "
↓
" (See Table 2);
3)Press "ENTER" to confirm the setting and exit,
or press "EXIT" to cancel the setting and exit;
5
2
、
SELECT TEST PHASE
:
1) Move to this column through "
↑
" and "
↓
";
2) Press the "ENTER" key to enter the parameter
setting state. At this time, the "=" on the left side
of the column will change to "
→
", and then adjust
the parameter to the corresponding value
through "
↑
" and "
↓
" (Cycle display A, B, C, N );
3)Press "ENTER" to confirm the setting and exit,
or press "EXIT" to cancel the setting and exit;
This
symbol
represe
nts the
current
selectio