Accessing the Network Module
Installing the Network Management Module – 12
2.3
Accessing the web interface through RNDIS
This connection is used to access and configure the Network Module network settings locally through a RNDIS (Ethernet over USB
interface).
2.3.1
Connecting the configuration cable
1. Connect the Micro-B to USB cable to a USB connector on the host computer.
2. Connect the cable to the Settings connector on the Network Module.
2.3.2
Web interface access through RNDIS
2.3.2.1
Configuring the RNDIS
a Automatic configuration
b Manual configuration
STEP 1 – In case Windows® OS fails to find driver automatically, go to the Windows control panel>Network and sharing
center>Local area connection
STEP 2 – Right click on the RNDIS local area connection and select Properties.
STEP 3 – Select Internet Protocol Version 4 (TCP/IPv4)” and press the Properties button
RNDIS driver is used to emulate a network connection from USB.
After the card is connected to the PC, Windows® OS will automatically search for the RNDIS driver.
On some computers, the OS can find the RNDIS driver then configuration is completed, and you can go to
Accessing the web interface.
On some others it may fail then proceed to manual configuration.
Summary of Contents for INDGW-X2
Page 10: ......
