Page 5
IL01222025E
Effective 11/2007
8
LOCK-OFF
Move slide knob to AUTO position.
Pull out the Lock-Off lever when
breaker is in OFF position, insert
one or two padlock shackles up
to .25 inch (6mm) in diameter.
CAUTION
The motor operator cannot be
locked off while it is in the ON
position.
7
Lock-Off Lever
Electrical Operation
•
Make sure the slide knob is located in the AUTO position.
•
Operating the OFF remote control switch will cause the breaker to go to its OFF position.
•
Operating the ON remote control switch will cause the breaker to go to its ON position.
•
Press the manual PUSH-TO-TRIP button on the breaker to verify that the breaker moves to the trip
position. Operating the OFF remote control switch again will reset the breaker.
•
Status window indicates Green / OFF, Red / ON and White / Tripped.
•
Always remove the operating key and move the slide knob to the AUTO position before operating
electrically.
