Capitole 40
12 1991.901 G01 002
2.1.2 Dimensions of installation rooms
In order to install a switchboard, a number of conditions
have to be satisfied. Therefore, the switch room has to
comply with certain requirements.
Height
There must be a free space of 200 mm available above the
switchboard, for fitting of the busbars and cable mounting.
For cubicles with a standard height of 2300 mm, this
means a room with a minimum height of 2500 mm. If a
foundation-frame is to be used, a further 100 mm must be
added, also by application from panels with trunking
(auxiliary busbar compartment )
Distance between the switchboard and wall, and
between the individual switchboards.
•
Front connection
In connection with heat dissipation there should be a
distance of approx. 60 mm between the rear of the
switchboard and the wall. There should be free space
at the front with open doors of at least 500 mm.
Therefore, the depth of the switch room must be at
least of: 60 + depth of switc widest door
+ 10 (hinge) + 500.
Figure 2-2: Installation against the wall
Figure 2-3: Installation with respect to the left wall
1) 300 mm for cubicles with trunking.
1)
Summary of Contents for Holec Capitole 40
