background image

1

Questions?/¿Preguntas? 1-800-334-6871 [email protected]

Instruction Manual/Instrucciones

PACKAGING CONTENTS/CONTENU DE L’EMBALLAGE/CONTENIDO DEL PAQUETE

FOR BEST RESULTS

• Install the motion sensor/transmitter 8-12 feet 

  above the ground. (Motion sensor is less sensitive 

  above 12 feet.)
•  Locate motion sensor so motion moves across 

  detection zone (Fig. 1).
•  Locate sensor away from heat producing sources to

  prevent false triggering. Also be very careful not to 

  include objects such as windows, white walls and

  water in the detection zone.
•  Locate sensor away from moving objects such as 

  trees, large shrubs and street traffic.
•  Do not install more than one motion activated 

  floodlight on one wall switch.

MOUNTING AND WIRING YOUR FIXTURE

 

WARNING: Risk of electric shock. Disconnect  

power at fuse or circuit breaker before installing  

or servicing.

NOTE:

 Fixture can be wall or eave mounted (Fig. 2).

NOTE:

 Coverplate mounts to recessed mounted 

standard junction boxes (Fig. 3). Junction box must be  
at least 1-1/2 inch in depth for proper installation for  
recessed mount application.

1.

  Line up the slotted holes on the mounting bracket (B) 

with the holes on your junction box. Using either (2) 

#6 screws or (2) #8 screws (D) (depending on size of 

the holes in your junction box), attach the mounting 

bracket (B) to your junction box (Fig. 4).

2.

  Connect house ground wire to mounting bracket 

ground wire using a wire nut (E) provided (Fig. 4).

3.

  Connect fixture black wire to house black wire, and 

fixture white wire to house white wire, using the wire 

nuts (E) provided (Fig. 5).

4.

  Level and secure the mounting bracket arm by  

tightening the rotation clamp screws and attach 

fixture (A) to the mounting bracket (B) using (2)  

decorative cap nuts (D). Be sure no loose wires 

remain sticking out from underneath the coverplate 

(Fig. 5).

5.  

Move the heads to aim light where desired.

6.  

Apply silicone caulk around the edge of the  

     coverplate to provide a watertight seal from rain  

     and moisture.

7.  

Turn on power at main fuse/breaker box.

ITEMS REQUIRED

 

(Purchase separately)

•  Phillips screwdriver
•  Outdoor weatherproof silicone caulking

IMPORTANT SAFETY INSTRUCTIONS

When using product, basic precautions should always be followed, including the following:

•  Heed all warnings, including below warnings AND those included on product.
•  Save these instructions and warnings.
•  For outdoor use only.
•  cULus LISTED for wet location.
•  Disassembling your fixture will void the warranty.
•  Your fixture is prewired and preassembled for easy installation.

•  Read and follow these instructions.
•  Risk of fire/electric shock. If not qualified, consult an electrician.
•  Disconnect power at fuse or circuit breaker before installing or servicing.

CAUTION

•  Connect fixture to a 120 volt, 60 Hz power source. Any other connection voids  

the warranty.

•  Fixture should be installed by persons with experience in household wiring or by a 

qualified electrician. The electrical system, and the method of electrically connecting 

the fixture to it, must be in accordance with the National Electrical Code and local 

building codes.

•  Fixture designed for wall or eave mount to a junction box only. Mount fixture to a 

grounded, recessed-mounted standard junction box marked for use in wet locations.

•  Do not mount below 5 feet.
•  This device complies with Part 15 of the FCC Rules. Operation is subject to the  

following two conditions: (1) This device may not cause harmful interference, and (2) 

this device must accept any interference received, including interference that may cause 

undesired operation.   
     

WARNING: FCC Regulations state that any unauthorized changes or  

modifications to this equipment not expressly approved by the manufacturer 

could void the user’s authorization to operate this equipment.

SAVE THESE INSTRUCTIONS.

MST18VCB 

MST28VCB

(Bronze/Bronze/

Bronce)

A.

 Light fixture

  Appareil d’éclairage
 Accesorio

 ENGLISH

C.

  (2) #6-32 x 3/4 in. and (2) #8-32 x 3/4 in. junction box screws 

   (use the size that fits your junction box)
   (2) vis nº 6 de 32 x 3/4 po et 2 vis nº 8 de 32 x 3/4 po pou 

   boîtier de jonction (choisissez la dimension convenant  

   à votre boîtier de jonction)
   (2) Tornillos #6-32 x 3/4 pulg. y (2) tornillos #8-32 x 3/4  

   pulg. para montaje de la caja de conexiónes (utilice el    

   tamaño que mejor se adecue a su caja de conexiónes)

E.

  (3) Wire nuts

  (3) Serre-fils

 

(3) Tuercas para cables

D.

  (2) Decorative cap nuts

  (2) Écrous borgnes décoratifs

 

(2) Tuercas decorativas

B.

   Mounting bracket

   Support de montage
   Soporte de montaje

2A

Wall mount

Eave mount

4

B

2B

Round

1-1/2 in.

Octagonal

1-1/2 in.

3

MST18VCW
MST28VCW

(White/Blanc/Blanco) 

1

Reviews: