22
www.eaton.com/HaloHome
2
Adding the smart internet access bridge to the APP
•
Open to the HALO Home app.
•
Press the “ “ menu button in the upper left and navigate to “
Controllers
”
•
Tap the “
+
” icon to go to the add device screen.
IMPORTANT:
You will need to have at least one HALO Home device already claimed and
powered before you connect the Bridge.
3
Select your Bridge from the list of available devices and press “
Done
”.
Note:
This will automatically begin the Wi-Fi connection process.
4
Choose your preferred Wi-Fi network in the app. Enter your Wi-Fi network password to complete the setup.
Note:
Your Wi-Fi network password and your HALO Home password may be different.
Having trouble?
There are two ways to reset your Bridge. You can either reboot it or perform a reset.
Reboot:
Press the button on the Bridge for 5 seconds to reboot the Bridge. This will reconnect your Bridge to
your Wi-Fi network.
For additional support go to eaton.com/HALOhome
Reset:
Want to start over? Press the reset button for 15 to 20 seconds.
On a successful reset, you will see the Blue LED blinking, indicating the Bridge is ready to be
claimed again.
If you do not see any change in the Blue LED, just unplug the Bridge and plug it back into the power
outlet to perform a power cycle. After around 2 minutes you will see the Blue LED blinking and you
can claim the Bridge back to your account.
HALO Home Quick Start Guide - Smart Internet Access Bridge